Mon. – Thu.: 8 am – 6 pm 03 83 16 97 39 🇫🇷 Signs made in France
Light Box / Acrylic-face light box

Your light box with no visible frame.

3D preview
LOGO
100.0 cm 50.0 cm
Live 3D preview
LOGO enseigne
Live pricing · Quote in 2 minutes · No obligation
Inside an acrylic-face light box

Anatomy of the acrylic-face light box.

A full PMMA face carrying the artwork, a Dibond edge wrapping it without protruding, an LED back — three layers for a clean, bright box with no visible frame.

01 · Acrylic face 02 · Dibond edge 03 · LED back
01

Opal PMMA face

5 mm opal acrylic sheet covering the whole front. The artwork is UV-printed or applied as translucent vinyl: legible by day, illuminated by night.

PMMA · 5 mm
02

Dibond edge

Folded and lacquered aluminium composite return, flush with the face: no profile, no screws, no frame visible from the front.

Dibond 3 mm · 80 to 120 mm deep
03

Back + LED modules

Rigid back plate carrying 12 V LED modules laid out in a grid. Even lighting across the whole face, with no hot spots.

12 V LED

Technical specifications

Face with no visible frame

The PMMA face sits flush with the edge: seen from the front, no frame or profile at all. A clean, contemporary look that gives the artwork all the space.

High-definition UV printing

Artwork printed directly onto the PMMA at 1440 dpi, or translucent vinyl for flat colours. Vivid colours by day, even diffusion by night.

160 lm/W LEDs

High-efficiency LED modules laid out in a grid inside the box. Uniform brightness, low consumption.

RAL edge colour of your choice

Oven-baked lacquered Dibond return in the shade of your choice, matching or contrasting with the artwork.

IP65 outdoor rated

Sealed assembly with a silicone joint all round: suitable for façades, resistant to UV and weather.

Up to 3 m in one piece

Made as a single piece up to 3 m; beyond that, joined modules with invisible seams.

Installation available in the Grand Est

Adjustable wall brackets supplied. Our team installs on site throughout the Grand Est, cherry picker included if needed.

Frequently asked questions

The cut-out box has your letters cut into a Dibond panel: only the letters light up. The acrylic-face box lights the whole front through a full PMMA sheet carrying the printed artwork: ideal for colour logos, photos and solid backgrounds.
Direct UV printing on the PMMA suits rich artwork (photos, gradients). Cut translucent vinyl is perfect for flat colours and text, and is easy to replace if your branding changes. Our design office advises you based on your file.
The acrylic-face box comes single-sided for wall mounting, or double-sided on a bracket to be seen from both sides of the street. The LEDs are sized accordingly.

A special project?

Very large format, non-rectangular shape, double-sided on a bracket? Our design office assesses the feasibility of your request within 48 hours.

Contact our team